recommended torque for panel mount screws: 0.23 to 0.34 n.m (2.00 to 3.00 8. 1=with grey dust cover supplied 7. 4=no dust cover supplied 5=with black dust cover supplied series, rugged usb 0=no dust cover supplied single port, vertical pcb tails ordering code: m u s b - e 5 5 1 - x x to suit customer requir ements. consult with recommended enclosure panel: 1.20 to 2.50mm (.047 to .098") thick. in-lbs) for screws with 2.50mm (.098") thread engagement. amphenol canada for details. usb 'mini-ab' receptacle, notes: material: 1. all materials are rohs compliant per eu directive 2002/95/ec and amendments outer shell: die cast zinc alloy, nickel plated ? contacts: phosphor bronze, plated with 0.76 microns [30u"] gold over ? 1.27 microns [50u"] minimum nickel on the mating area with gold flash over nickel on the tails. usb housing: engineering thermoplastic, flammability rating ul94v-0, ? black. usb shell: copper alloy, nickel plated ? gasket: poron with adhesive backing. ? dust cover: silicone rubber with nickel plated copper alloy bushing. ? environmental performance per iec 60529 code ip67 for seal between 2. mating area and pcb side of connector. gasket provides seal to inside face of enclosure panel. available dust cover provides added protection. see sheet 2 for application view. current rating: 1 ampere. 3. contact resistance: 50 milliohms maximum. 4. operating temperature: -40 c to +105 c. 5. dust covers may be ordered separately. specify 6. musb-2e151-005bp for grey dust cover ? musb-2e151-015bp for black dust cover ? dust cover option special connectors: many unique features are readily available note: there is no difference between dust cover options '0' and '4' thread option 0=#2-56 unc thread n=m2.5 x 0.45 thread (amphenol standard) q=m2 x 0.4 thread (amphenol special) feb20/09 k.lambie 03554 3 4 5 6 5 4 3 h g f e d c b a ab cdef gh 2 feb14/12 angular degrees 0.15 unless specified otherwise c sheet 2 c scale: rev ref. third of www.amphenolcanada.com code id no. description, ecn, ear no. app'd date dwg. no. 6 amphenol canada corp. rev angle 1 pcb tail, rohs compliant h.kim b product drawing (ear 13750) mar21/11 revisions or used for manufacturing purposes without written permission from amphenol canada corp. P-MUSB-E551-XX musb series rugged mini-ab usb drawing feb20/09 1 2 1 5:1 c ear 13476 drawn checked m.e. app'd q.a. app'd dwg appr. this document contains proprietary information and such information may not be disclosed to others for any purpose k.l. dwg size: do not projection millimeters inches primary units receptacle, vertical mount, secondary reference in parentheses scale eng. rel. no. k.l. general tolerances 1 decimal place 2 decimal places 3 decimal places product drawing (ear 14052) contact see ordering code thread option 5.00 [.197] deep threaded holes. position #1 contact position #5 .421 ref .787 20.00 .394 10.00 10.70 15.00 .591 die cast shell gasket mini ab usb receptacle ref. .748 9.20 ground tails 0.40 x 2.00 [.016 x 0.079] 7.30 .287 .362 [.016 x .010] 0.40 x 0.25 contact tails 19.00 12.23 ref .481 dust cover optional see ordering code 58.45 ref 2.301 9.20 ref .362 6.20 ref .244 hole 2.60 [.102] mounting .208 5.28 .089.010 2.50 .098 .087 2.20 .244 6.20 .118 3.00 2.250.25 5.70 .224
1.30 .051 enclosure panel mini-ab handle mark "top" usb receptacle cover with mounting screws (not supplied) dust cover application feb20/09 03554 3 4 5 6 5 4 3 h g f e d c b a ab cdef gh 2 1 product drawing (ear 14052) c angular degrees 0.15 sheet 2 c scale: rev dwg. no. third of www.amphenolcanada.com code id no. description, ecn, ear no. app'd date rev 6 amphenol canada corp. or used for manufacturing purposes without written permission from amphenol canada corp. revisions 2 pcb tail, rohs compliant h.kim b product drawing (ear 13750) mar21/11 k.l. this document contains proprietary information and such information may not be disclosed to others for any purpose P-MUSB-E551-XX musb series rugged mini-ab usb drawing k.lambie feb20/09 2 1 5:1 c ear 13476 drawn checked m.e. app'd q.a. app'd dwg appr. eng. rel. no. receptacle, vertical mount, dwg size: do not projection millimeters inches primary units secondary scale reference in parentheses unless specified otherwise angle ref. feb14/12 general tolerances 1 decimal place 2 decimal places 3 decimal places k.l. recommended p.c.b. layout 1 3 5 component side of board 2 4 locate holes 0.13 [.005] dia position dimensions are basic .287 7.30 0.08 2.40 .002 .028 .026.003 0.80 .031 5 holes 0.08 3.20 .126 0.05 0.65 1.75 .069 .094.003 ref. 0.70 2.60 .102 recommended panel cutout max .049 max 1.25 r9.75 0.20 6.75 .008 .266 .008 0.20 .384 .110 for m2 x 0.4 thread 2.30 [.090] 2.80 for #2-56 unc & m2.5 x 0.45 thread or 15.00 .591
|
